CONSOLIDATION OF HIERARCHY-STRUCTURED NANOPOWDER AGGLOMERATES AND ITS APPLICATION TO NET-SHAPING NANOPOWDER MATERIALS
Abstract
References
1. Suryanarayana, C. Nanocrystalline materials. Int. Mater. Rev. 1995, 40, 41–64.
2. Knorr, P.; Nam, J.G.; Lee, J.S. Sintering behavior of nanocrystalline γ-Ni-Fe powders. Metall. Mater. Trans. 2000, 31, 503–510.
3. Lee, J.S.; Cha, B.H.; Kang, Y.S. Processing of net-shaped nanocrystalline Fe–Ni material. Adv. Eng. Mater. 2005, 7, 467–473.
4. Cha, B.H.; Lee, J.S. Surface roughness and sintering characteristics of Fe–8 wt % Ni component fabricated by PIM. J. Kor. Powder Metall. Inst. 2009, 16, 342–350.
5. Lee, J.S.; Cha, B.H.; You, W.K. Full-density nanopowder agglomerate sintering of injection molded iron-nickel. Int. J. Powder Metall. 2010, 46, 27–34.
6. Lee, J.S.; Kang, H.G.; Kang, Y.S. The Importance of Agglomerate-Size Control in Full-Density Processing of Nanopowder by Pressureless Sintering. In Proceedings of the World Congress on Powder Metallrugy & Particulate Materials 2008, Washington, DC, USA, 8–12 June 2008.
7. Lee, J.S.; You, W.K.; Cha, B.H. Hierarchical structured nanomaterial fabricated by nanopowder agglomerate sintering. Mater. Sci. Forum 2010, 638–642, 93–97.
8. Lee, J.S.; Kang, Y.S. Processing of bulk nanostructure Ni-Fe materials. Scr. Mater. 2001, 44, 1591–1594.
9. Divinski, S.V.; Hisker, F.; Kang, Y.-S.; Lee, J.S.; Herzig, Chr. 59Fe grain boundary diffusion in nanostructured γ–Fe–Ni: Part I: Radiotracer experiments and Monte-Carlo simulation in the type-A and B kinetic regimes. Z. Metallkd. 2002, 93, 256–264.
10. Divinski, S.V.; Hisker, F.; Kang, Y.-S.; Lee, J.S.; Herzig, Chr. 59Fe grain boundary diffusion in nanostructured γ-Fe-Ni part: Effect of bimodal microstructure on diffusion behavior in type-C kinetic regime, Z. Metallkd. 2002, 93, 265–272.
11. Divinski, S.V.; Hisker, F.; Kang, Y.S.; Lee, J.S.; Herzig, Chr. Tracer diffusion of 63Ni in nano-γ-FeNi produced by powder metallurgical method: Systematic investigations in the C, B, and A diffusion regimes. Interface Sci. 2003, 11, 67–80.
12. Lee, J.S.; Yun, J.C.; Choi, J.P.; Lee, G.Y. Consolidation of iron nanopowder by nanopowder-agglomerate sintering at elevated sintering. J. Kor. Powder Metall. Inst. 2013, 20, 1–6.
13. Lee, J.S.; Kang, Y.S.; Kwon, S.K.; Cha, B.H.; Qin, X.Y. A new processing route for net-shaped nanoparticulate materials. Adv. Powder Technol. 2004, 15, 639–655.
14. Qin, X.Y.; Lee, J.S.; Nam, J.G.; Kim, B.S. Synthesis and microstructural characterization of nanostructured γ-Ni-Fe powder. Nanostr. Mater. 1995, 11, 383–397.
15. Kim, B.S.; Lee, J.S.; Sekino, T.; Choa, Y.H.; Niihara, K. Hydrogen reduction behavior of NiO dispersoid during processing of Al2O3-Ni nanocomposites. Scr. Mater. 2001, 44, 2121–2125.
16. Jung. S.S.; Kang, Y.S.; Lee, J.S. The optimization of hydrogen reduction process for mass production of Fe–8 wt % Ni nanoalloy powder. Mater. Sci. Forum 2007, 534–536, 153–156. Materials 2013, 6 4063
17. Jung, S.S.; Lee, J.S. In-situ kinetic study of hydrogen reduction of Fe2O3 for the production of Fe nanopowder. Mater. Trans. 2009, 50, 2270–2276.
18. Lee, J.S.; Yun, J.C.; You, W.K. Full Density Processing of Pure Iron Nanomaterial by Nanopowder Agglomerate Sintering and Related Properties. In Proceeding of the World Congress PM 2010, Florence, Italy, 10–14 October 2010.
19. Nam, H.Y.; Kwon, S.K.; Kang, Y.S.; Lee, J.S. Sintering behavior of the PIMed Fe–50 wt % Ni nanoalloy powder. Mater. Sci. Forum 2004, 449–452, 1141–1144.
20. Rahaman, M.N. Ceramic Processing and Sintering; Marcel Dekker, Inc.: New York, NY, USA, 1995.
21. Cha, B.H. Sintering Behavior of Net-shaped Nanocrystalline Fe–Ni Powder Material and Its Mechanical Properties, Ph.D. Thesis, Hanyang University, Hanyang, Korea, 2009.
